South Florida Mold Remediation
A Complete Mold Remediation Services Overview
Find out exactly what goes into a complete mold remediation project from start to finish. Miami mold inspection and assessments, 3rd party mold testing and mobile laboratory processing, mold removal/mold remediation, mold prevention information for tenants and renters, home owners, property owners, and property management companies throughout South Florida.
South Florida Mold Services
What is Mold Remediation?
When you have mold in your house, or some other property, the process for removing the mold is called mold remediation, and there are companies that specialize in this process.
What causes mold in South FL?
Mold is caused by water, excess moisture, condensation, humidity, evaporation, and precipitation getting into spaces that should really stay dry. For example, mold is known to grow in:
- Under carpet
You probably have seen mold in your bathroom before, but you might not have realized that it is mold. You should look around the side of the bathtub or shower and you can see the discolored sections. Some sections might be completely black. That is mold.
This mold has built up because there has been water around the side of the bath and it has not been cleaned. When paired with the heat in the bathroom, mold has started to develop and spread.
Can you remove mold yourself?
There is no written rule that says you cannot remove the mold yourself because it is so toxic, that a specialist has to do it. It is actually the other way around. Most environmental agencies will tell you that the homeowners can remove the mold themselves as long as the infected area is smaller than 3 square feet.
This is because mold is not really toxic, most of the time anyways… Not in the way it has been portrayed in the media anyway. There are toxic molds like Asbestos, that will need to be removed by a professional, but regular household mold is usually not one of them.
If you go back to the bath room, you can easily remove that mold yourself. You just have to wipe the area down with a mold remover and then reseal the bath tub or shower. That is it. However, as the bathroom will always be wet and hot, there will always be mold growing somewhere, unless you have proper ventilation installed.
Larger Areas Affected by Toxic Mold
If the mold is spread over larger areas, then the removal can get a lot trickier. Firstly, you will have to find out where the water is coming from. If there is mold in the walls, then there might be a leaking pipe somewhere. Once the leak is sealed, you can start removing the mold.
Start by using a biocide or fungicide on the infected area. You should wear gloves for this. Contrary to popular belief, bleach is not strong enough to remove most molds, so you will need to buy a specific mold remover from the store.
If the mold is throughout the house or property, then you should hire a professional mold remediation company immediately. They can get rid of mold in far less time than you could and they have specialist equipment to make sure that there is no further contamination.
Advantages Of Hiring Professional Mold Inspection Companies
Hiring Professional Mold Inspection Companies
Mold inspection and mold removal is a process which is as easy as A, B, C and you can do it by yourself, right? Wrong! This is a frequent experienced misconception which most homeowners have. When it comes to mold removal, it is advisable to leave it to the experts.
Choosing the best mold inspection companies is not an easy job these days due to the huge number of companies in the market that don’t have the necessary training and yet they are offering this service. Therefore, you might get a lot of complication and confusion when deciding which inspection company to hire. Mold inspection companies should have great experience and be competency in their work which is not the case with some companies.
Since mold inspection involves health and safety aspects of your home, you need to arrive at the right decision as the primary work of mold inspection companies is to identify the various parts of your house that are affected by the mold. All these aspects shows that you should go for an experienced, certified as well as licensed professional company who can give you the best results.
The most important part of mold inspection is conducting of visual search for mold, infrared scans, sampling and outdoor air quality testing, and the inspectors sends the mold samples to their lab for identification of the precise nature of the mold and types of mold. They analyze the result from the lab so that they can prepare a detailed report which include high quality recommendations on how to sanitize as well as disinfect all areas affected by mold.
Reliable home and mold inspection companies will provide you with a list containing the details of their existing clients. You can request the inspector to provide you with a clear estimate and make sure that the home inspection company you choose assigns you background checked employees. If a service company is not willing to provide you with all these information, move to the next company without hesitating. When you make effort to get a reliable, dedicated and skilled company, mold inspection becomes more realistic and it is good to choose an inspector who you are comfortable to work with.
Lastly, professional mold inspection companies will always interact with you in a cordial way and all unclear points will be clarified with a lot of responsibility. In addition, they will complete you job within the allocated time and thus be cost effective while giving you quality services. They can never leave any aspect to guesswork and all their conclusions will be based on pure facts.
- A Complete Mold Remediation Process-
- Investigation and Report
- Lab Testing
- Odor Removal
- Sanitizing Carpeting, Upholstery, furniture
- Allergy Cleansing
- Hepa-Vac Process
- Dry-Ice Procedures
- Filtering and Fumigation of Vent and/or Duct Systems
- Before and After mold inspection samples and tests.
- Consultation and advice on preventative actions to reduce the risk of any future mold growth.
Mold Inspection, Mold testing, and Mold removal technologies used during a complete mold remediation project
Advanced Robotics Home Inspection South FL
Aerial Drone Inspection South FL
Air Scrubbers & HEPA Filters for Mold and Indoor Air Quality Services in Miami
Anti-Mold Fungal Coating Services Miami
CO2 Hydrogenation Mold Removal Services
Cold Jet Mold Remediation South Florida
HVAC Unit Steam Cleaning Technology South FL
Indoor Air Quality Pollution Monitoring Service South FL
New Odor Eliminating Service Technology South FL
Next Gen Aerosol Mold Prevention Spray by Miami Mold Specialist
Next Gen HVAC Coil & HVAC Evaporator Cleaning Solutions
State of the Art Electrostatic Mold Removal Services Miami
Titan Hydroxyl Mold Removal South FL
ULV Particle Fogging Technology
Vector Fogging Service Technology Miami, FL
Have You Ever Inspected Your Home for Mold?
State of the Art Mold Inspection, Mold Assessment, and Mold Detection Services South Florida
Ideally, mold produces tiny organisms called spores. When spores land on damp spots, they begin to reproduce and grow. In addition, if there is plenty of organic food, presence of high humidity, moderate temperatures, stagnant air, and plenty of time, then, molds will flourish anywhere in your home (indoors or outdoors). In most cases, molds can grow on wood, carpet, foods, or even paper. Molds that grow inside the house are quite dangerous and can cause health problems, especially if spores develop on consumables/food. Moreover, airborne-mold-spores can cause allergic reactions, skin infections, asthma episodes, and other respiratory conditions. Therefore, there is a need to eliminate them as much as possible. Unfortunately, there is no practical method of doing that, but the best option can be to control the moisture content in the room.
As stated in the introductory section, development of molds in your home is quite dangerous. Therefore, steps to eliminate and remove them should be employed as soon as possible; but how can that be achieved? Well, mold inspection service(s) is the fundamental step in making sure molds are controlled.
First and foremost, mold inspection services is an activity that is basically contacted by trained and certified professional (sometimes called, mold inspector). During the inspection, the mold inspector test and/or inspects thoroughly for molds in apartments, commercial properties, homes, workplaces, and anywhere spores and molds can grow. To carry out the inspection services, the mold-testing experts utilizes the best and the latest equipment/machines in the industry. These powerful machines and equipment include Laser Particle Counters, Infrared (IR) Cameras, Thermal Imaging Equipment (TIE), and many more. With the above sophisticated machines, certified mold inspectors will identify moisture intrusions in structures and potential sources of moisture that accelerates the growth of mold. To achieve accurate inspection results, follow-up testing is always done during the process. Finally, in accordance with the results of the inspection, an extensive report of mold inspection services is prepared for remediation purposes.
Mold inspection basically involves two actions; finding the where the mold is growing in your home and investigating to find what caused the mold to grow in the first place. Even if you are already aware of mold growing in or around your house or building, it is always a good idea to perform a thorough mold inspection as visible mold growth is usually a positive indicator that there is more mold growing somewhere out of view.
Our mold inspection and mold assessment experts use a wide range of high tech mold detection equipment to investigate, collect, and analyze all of our findings, such as Swab Samples, Air and Moisture Readings and Test Samples, Physical Mold Tests, non invasive Inner-Wall infrared scanners, Manual Readers, Laser Scanners for Foundation Beams, Leak and Moisture Detection scanners, and Toxic Mold Sensors.
Types of mold you could find in your home-
From the above overview, mold inspection services are inevitable if there is a need to eliminate molds in a certain structure. In other words, the above step is the backbone for mold remediation. Otherwise, avoidance of mold inspection services means other steps for mold elimination will be null and void.
Mold Testing South Florida
Advanced Mold Testing Solutions
If you are in the market to either buy or sell a home one of the first steps people take is contacting a mold testing service. The major reason behind this move is because if you are a buyer of a home you would not buy a home that has mold as it cold lead to diseases. It is for this reason that a buyer has to seek the best service providers in the market. In the case for sellers, selling a hose with even the little bit of mold can be quite a difficult task so by contacting a mold testing service provider the mold is detected early when it is easier to handle since it is easier to handle minor mold.
When choosing a service provider one should first check their experience in the field. Experience is gained on the more cases the service provider has had in the past. The experienced are able to detect the airborne mold that is usually the most difficult to identify especially in cases where the building is vacant or has just been remodeled.
The best in the field offer both assessment of the buildings and a complete laboratory analysis of the specimen collected. They should provide before clean up testing and this is done to determine the severity of the problem at hand. After the clean up is done this is mostly by a cleaning service provider who work closely with the mold testing service they come back to carry out a post clean up testing so as to verify that there are no mo cases of mold in the building.
The mold testing service should also be a certified micro bio investigator this is the only way of ensuring yo get quality services. The service provider should also case the least possible damage to the building when they are carrying out the testing as damage increases the cost of repair to the building. They can only do this by the use of state of the art technology that includes infrared cameras and use of a wide variety of field meters.
Some of the things to look out for when testing include leaking roofs, wet basements and ice dams too. In the search for ways to conserve energy buildings are nowadays being built so tight. This could reach their goal of saving energy but could lead to poor ventilation in the building and allergens and toxic mold accumulation in the building and this are some of the important things mold testing service providers look out for.
The mold testing process utilizes the mold samples and data collected during the initial mold inspection. Mold testing helps to confirm whether you in fact have mold growing inside your home or building, the type(s) of mold found in and around your building, the levels of mold spores present, etc.
Professional lab scientists who have experience in analyzing mold samples can lead to a more effective mold remediation process.
It is always a good idea to hire a highly qualified mold inspection professional that works with independent laboratories. This helps to remove any conflict of interest with the confirmation of the data and samples collected by the Florida mold inspectors.
Our mold tests are conducted in an independent laboratory, both before and after the completion of the job to insure the elimination of all airborne mold spores.
Mold Testing Services South Florida
Miami Mold Removal
High Tech and Eco-Friendly Mold Remediation Services South Florida
Professional mold removal companies are an alternative to Individuals who are troubled with mold in their homes may need the services of a professional mold removal company. These are individuals who will give you the best mold removal company you need at the price you can afford. Take advantage of these professionals to make sure your home is free of toxic molds that cause breathing difficulties, impair concentration or have other negative side effects. Molds may be responsible for rising asthma and allergy rates as well. Professional mold removal services are important to utilize. Even though mold is everywhere and the spores can be distributed throughout your home using a mold removal service is important to the removal of these spores.
There are several types of molds that can invade your home and can cause problems within the home. Not all homes have toxic black mold but if you are experiencing asthma or allergies it is probably worth checking. You can use professional mold removal services to remove the mold that may be growing in your walls. Toxic black mold also known as straybocha can be one the molds that your mold removal service should be able to remove in a safe, effective an non toxic manner. Molds give off gasses that are trapped in the house. Trapped mold can lead to a variety of inflammatory responses in the body and needs to be removed. Professional mold removal services should be able to completely remove toxic mold and mold spores from the home in a manner that is going to be effective and safe.
The products they use to remove mold and mold spores from the home should be safe fro use even around chemically sensitive persons. Removal companies should most likely be using a Borax based product as these completely kills molds and leave no chemical residue. Biocides may not be the best products to use for killing mold because they can kill beneficial bacteria as well so make sure to investigate what the mold removal company will be using to remove mold. A professional mold service is one of the things you may need to ensure your home is mold free. Homeowners need get the right home mold professionals that will remove toxic mold in a safe and effective manner.
The mold removal professionals should be willing to put their contract in writing. Make sure that you understand what is going to be done in terms of mold removal, and that mold spores are not going to be blasted throughout your home.
Indoor Environmental Services-
The Mold Removal Process-
Some people say if the mold growth is only covering a small area, usually 3-10 square feet or so, and is not toxic(if you can determine this, then you should be able to perform the mold redemption yourself. Well, this is not always a safe idea and for several reasons. The affected areas need to be completely sealed off as to prevent the spread of the possibly toxic mold spores from traveling and settling in other parts of the house as well as to prevent mold spores from stirring into the air and contaminating any other part of the structure. Once you have contained the mold, use a solution to remove the mold from the surface. Solutions available in the market for mold removal include Borax, Vinegar, Ammonia, Tea tree oil, fungicides, biocides, etc.
Proper ventilation needs to be used along with personal safety equipment and respirators. All mold damaged materials need to be treated and removed in sealed bags. HVAC systems will also need to be disinfected and treated.
Mold removal process involves a number of steps, which include:
– Wearing protective equipment
– Sealing off the contaminated areas
– Containing mold spores
– Setting up negative pressure and HEPA vacuums
– Removing the mold and treating areas with mold removal
– Preventing mold from returning
– cleaning belongings
– Disposal of the mold
– Final mold inspection, sample collection, and mold testing.
When it come to mold removal, it is always advisable to hire an established, licensed, insured, and certified mold removal and mold remediation service provider; regardless of how small of an infestation.
Official Florida Mold Resource Links
- CDC – Mold – Cleanup and Remediation: Strategies for the Control and Removal of Fungal Growth
CDC Mold Web site provides information on mold and health, an inventory of state indoor air quality programs, advice on assessment, cleanup efforts, and prevention of mold growth, and links to resources.
Mold Removal Companies South Florida
If you are in need of professional mold remediation services, some words to the wise- do a little research before hiring a mold removal company in Florida.
Miami Mold Specialist currently serves the following areas-
- Bal Harbour Mold Removal Companies
- Boca Raton Mold Removal Companies
- Bonita Springs Mold Removal Companies
- Boynton Beach Mold Removal Companies
- Broward County Mold Removal Companies
- Cape Coral Mold Removal Companies
- Collier County Mold Removal Companies
- Coral Gables Mold Removal Companies
- Dania Beach Mold Removal Companies
- Davie Mold Removal Companies
- Delray Beach Mold Removal Companies
- Florida Keys Mold Removal Companies
- Ft. Lauderdale Mold Removal Companies
- Ft. Meyers Mold Removal Companies
- Greater Miami Area Mold Removal Companies
- Hollywood Mold Removal Companies
- Homestead Mold Removal Companies
- Kendall Mold Removal Companies
- Lake Worth Mold Removal Companies
- Lee County Mold Removal Companies
- Marco Island Mold Removal Companies
- Miami Beach Mold Removal Companies
- Miami-Dade County Mold Removal Companies
- Monroe County Mold Removal Companies
- Naples Mold Removal Companies
- Palm Beach County Mold Removal Companies
- Pembroke Pines Mold Removal Companies
- Pompano Beach Mold Removal Companies
- Sanibel Island Mold Removal Companies
- South Florida Mold Removal Companies
- West Palm Beach Mold Removal Companies
Schedule A Mold Consultation With Miami Mold Specialist!
Miami Mold Specialist:
South Florida’s Premier Indoor Air Quality, Environmental Services, and Mold Removal Service Provider- Miami Mold Specialist:
High Tech and Eco Friendly Indoor Air Quality, Mold Assessments and Environmental Consulting, 3rd Party “Conflict Free” Mold Testing, Mold Removal and Mold Remediation, Mold Prevention, Radon Testing, Water Damage Control, and Water Protection and Purification Services by Miami Mold Specialist.
Multi Certified, Licensed, Bonded, and Insured. Over 30 Years Experience!
Servicing: Miami-Dade County, Ft. Lauderdale and Broward County, Palm Beach County, Collier County, Monroe County, Lee County, Greater Miami Area, Miami Beach, Bal Harbour, Hollywood, Dania Beach, Davie, Homestead, Kendall, Coral Gables, Pembroke Pines, Pompano Beach, Boca Raton, Lake Worth, Delray Beach, Boynton Beach, West Palm Beach, Florida Keys, Ft. Meyers, Naples, Bonita Springs,Cape Coral, Marco Island, Sanibel Island, South Florida
Click here for a new updated website