Mold Inspection, Mold Removal, and Remediation Services
Mold Inspection – Mold Detection – Mold Assessment
Comprehensive Mold Detection Report: We provide the most comprehensive Mold Inspection Miami Lakes Report in the industry using the following methods during your mold assessment:
- Swab Samples
- Air Samples
- Particle Counters
- Inner Wall Checks
- Manual Moisture Readers
- Laser Scanners for Foundation Beams
- Toxic Mold Sensors
Detailed Outline Of Our Mold Inspection Process: (6 step process)
1. Miami Mold Specialist sends down two certified technicians, as well as an environmental analyst to perform a full mold inspection of your premises. They start by collecting pertinent information from you in regards to any water damage you may have had in the past, the length of time and reason you suspect you have a mold problem as well as any possible health symptoms you have been experiencing. This will provide them with a brief insight as to the cause of your concern.
2. Our technicians then perform a visual assessment by doing a walk through to determine possible areas of suspect growth. Infrared Thermography images are taken throughout, to ascertain possible indications of water damage, the source of any moisture intrusions as well as any construction defects possibly causing or attributing to your mold issue.
3. The technicians will then take both swab and air samples to be evaluated by a microbial laboratory for analysis. The swab sample will determine if mold is present on the surface; the type and severity of the mold species present; and the toxicity level of the mold; while the air sample (when used with an outdoor baseline sample for comparison) will determine if elevated levels of airborne mold spores are present throughout the air in your premises and if so, the type, severity and toxicity level of the mold spores as well.
4. Tests will also be taken using moisture readers and air particle counters from both indoors and outdoors, showing immediate results, which will be conveyed to you upon completion of your mold assessment as well as in your Mold Inspection Report.
5. Within 2-3 business days, we submit your laboratory results to you along with your full Mold Inspection Report. Your report will contain all Infrared and Digital images taken during the mold inspection, along with a full explanation of all images. Your report will also elaborate on the technicians’ general findings and recommendations, explaining the severity of mold growth in your property as well as the remediation process necessary to remove the mold and any steps necessary to prevent the mold from reoccurring.
6. Once the report is sent to you, a representative from our office administration will contact you to review your report, clarifying the results of your mold inspection and providing recommendations on how you should proceed and will follow up with you as you see fit. We are dedicated to providing the most comprehensive Mold Inspection Miami Gardens Report available in the industry. Top quality is our specialty as your personal objectives remain the foreground in establishing successful remediation or reparative action that’s right for you.
Miami Mold Removal Experts and Mold Remediation Consultants
When it has been determined that mold is present, our certified microbial remediators main concern is the potential risk for excessive mold exposure. Mold counts in the air can be 10 to 1,000 times higher during a black mold testing Miami Beach project. Therefore, we offer the following methods to maintain outstanding mold remediation performance:
- Containment Areas
- Hepa VAC
- Air Scrubbers
- Negative Air Pressure Units
- Cold Mist Air Fogger
- Dry Icing
- Air Filtration of Vent / Duct Systems
- Anti Fungal Biocide
Keep in mind that the specifics of your mold remediation service are determined based upon the specifics of your mold issue. Various factors are involved in outlining a customized mold remediation plan and your specified treatment process will be provided to you in detail in your Mold Inspection Report within two to three business days upon completion of your mold inspection service.
Once the remediation has concluded, a project manager will inform you as to the status of your property and schedule a post-remediation testing to insure all mold has been adequately removed from the treated area, as per client request. A mold removal Fort Lauderdale Clearance Certificate will then be issue to you, upon receipt of the results pertaining to the post-remediation sampling, if you have opted for the testing.
Conclusive Client Follow-Up
The follow-up will occur when all remediation and testing is complete. Your project manager or direct office administrator will contact you to answer any questions or address any concerns you may have and provide recommendations to avoid future mold issues.
Servicing: Miami-Dade County, Ft. Lauderdale and Broward County, Palm Beach County, Collier County, Monroe County, Lee County, Greater Miami Area, Miami Beach, Bal Harbour, Hollywood, Dania Beach, Davie, Homestead, Kendall, Coral Gables, Pembroke Pines, Pompano Beach, Boca Raton, Lake Worth, Delray Beach, Boynton Beach, West Palm Beach, Florida Keys, Ft. Meyers, Naples, Bonita Springs,Cape Coral, Marco Island, Sanibel Island, South Florida