Key Largo Mold Removal and Key West Mold Inspection

Call For Your Key Largo Mold Inspection and Key West Mold Removal Expert Today: +1-305-763-8070
Key Largo Mold Removal and Key West Mold Inspection
Key Largo mold removal and Key West mold inspection experts should employ the latest technology in mold removal, these are examples of mold mitigation techniques utilized by state certified mold inspection companies in Key West and Key Largo.

Outline of the Key Largo Mold Removal Process:

Step 1РOur Florida Keys mold inspectors in Key Largo and Key West visit your home, office, or building to conduct a comprehensive mold inspection service. key Largo mold inspection, key Largo mold removal, Key West mold removal, Key West Mold Inspections Free Estimates.Trustworthy & Knowledgeable. 25 Yrs Exp. Local Business.

schedule-miami-mold-Inspection

Step 2– Our mold inspectors will collect physical samples of mold, indoor air samples, and outdoor air samples to be sent over to our independent mold testing laboratory.

Step 3РThe scientists at the Key Largo mold testing laboratory will then forward over the results from the mold and air sample analysis, allowing us to complete our proprietary mold inspection report, and finally forward over to the client.

Step 4– Our mold experts in Key Largo and Key West will then go through the mold inspection report, explaining each section in it’s entirety, while impressing upon the client the importance of a mold removal service, when and where applicable. After the client agrees to a complete¬†South Florida mold removal service, our mold technicians jump into action, preparing the project for a safe and¬†clean mold removal¬†process.

Step 5РBefore the Key Largo yacht mold removal process starts, our technicians will have to set up clean rooms, high density blowers, sealed ventilation systems, air cleaning and filtration systems, etc. After the initial set up, our yacht mold removal specialists can get started removing and treating moldy contaminated materials, repairing the source(s) of moisture intrusion, treating infected areas, repairing any damage, and the final clean up and disposal of contaminated materials.

Step 6РThe final step on our complete mold remediation process is the final sampling of the air inside and outside of the home. This will allow us to compare the results with the initial Key Largo mold inspection to make sure the air inside of your home is clean and safe to breath.

schedule-miami-mold-Inspection

High Tech and Eco -friendly Mold Removal Services in Key Largo and Key West mold removal, Key West Mold Inspections

*Hyper-sanding* -or high efficiency air particle sanding, is used on the contaminated studs after we remove the drywall.We sand them first and once they are sanded we come back and treat it with a biocide or other chemicals. These are biocides that basically kill off molds, bacteria, or other pathogens. Then we normally hyper-vacuum the surface and floor area to remove any spores that may have fallen to the ground. We wipe down all the walls with an antifungal solution to make sure that the *mold* spores that were released are now eliminated and of course we put in the negative air machine and air scrubbers. A negative air machine basically is a machine that filters out contaminated air and is exhausted outside through a flexed tube. Then we put in an air scrubber that actually takes the air and exchanges it several times per hour.

*Biocide fogging*. The fog actually eliminates the airborne *mold* spores so that once they’re eliminated in the air they fall to the ground and then we use a wet mop technique to finally get up all the *mold* spores and everything else. Of course, if its carpet that we are dealing with, we put down 6 mil poly on the floor to make sure that anything that falls while we are doing remediation falls on the actual polyethylene and we contain that area away from the rest of the home.

Some Key Largo and Key West mold removal¬†service experts are certified to use organic and ‚Äėenvironmentally safe‚Äô products,cleansers, technologies,and new methodologies to remove mold. Florida boat mold removal companies to exercise these methods have reportedly had excellent results.

Florida Keys, Key Largo Mold Inspection, and Key West Mold Removal.

Call For Your Key Largo Mold Inspection and Key West Mold Removal Expert Today: +1-305-763-8070

Schedule An Estimate Today!

schedule-miami-mold-Inspection